are these grips different diameter e.g. clutch side and twistgrip, as my Honda twist grip is a larger diameter than the clutchside. January 27, 2017

There are three heat settings indicated by the LED light on the grip - red (high, 45°C), white (medium, 40°C) and blue (low, 30°C). I suffer from Raynaud's condition, which means my hands and feet get cold and become numb very easily. Because of this I have these grips switched on virtually all the time, even in summer. All of the connectors are of good quality and are very robust. The negative battery terminal has a ring connector but the positive wire does not which is both odd and a shame. The wires leading from the battery end have an added coating of plastic covering to protect them as they are routed through your bike’s fairing to the handlebars.I can have a Kawasaki zzrz400 performance sport. What are the best grips for my bike,thanks December 4, 2018 As long as the bars measure 22mm the grips will fit - you will need to find somewhere to mount the control unit.

W ith winter well and truly upon us, most of you hardy adventure riders will still be out and about on your bikes. The cold at this time of year can really take its toll on the body and one of the most vulnerable areas to the lower temperatures are your hands. There’s no getting away from the fact that having two cold hands will really affect your riding performance and could even put you at risk as your reaction times decrease.Customisable grips - Grip length of 132mm but can be trimmed to 123, 120 or 117mm if required, with open ends allowing bar end weights can be fitted. Hi would these Oxford heated premium hot grips (adventure fit my 2022 royal Enfield scram also a 2005 triumph bonnevilleplease. I was impressed at how easily the wires connected to the battery and each other during the installation process (all being good, chunky connectors). The main wire that had to be routed through my bike’s frame and the fairing was coated in plastic for extra durability. The instructions are on a single sheet of A4 and are clear and concise. They do state that the grips need to be fixed in place with glue, but no glue is included which is a shame.