AICO EI168RC Radiolink Base Unit EI168

Product Information

To set up a hybrid system, simply fit one Ei168RC base to an alarm in the existing alarm system and any new alarms with Ei168RC bases. We also offer Saturday AM and Saturday all day services which are available at the checkout for zone 0 addresses. The Ei168RC is a short range device using a transceiver to transmit, receive and repeat the RadioLINK RF protocol.

ZLT Electrical Limited was established in 2010 in Ashford, with intention of fully embracing the possibilities and technologies of online trading. Once all the alarms have been installed the RadioLINK system is secured by a special House Coding function to safeguard the system from interference from other RF systems.

The RadioLINK Base will normally be wired to the nearest mains circuit in the ceiling (usually the lighting circuit). The Ei168RC also supports remote Test, Silence and Locate messages coming from an Ei Electronics RF device. To find out more about cookies, including how you can disable/enable them in your browser, visit www. Google Dynamic Remarketing: We use these tracking tools to track user behaviour over time and across third party sites to improve the effectiveness of our online advertising.

They’re not the cheapest, but they meet the Scottish regs (lithium battery for 10 years for the wireless alarms) and they work well with the original system (those alarms are from a different manufacturer). Google AdWords Conversion: We use conversion tracking to help us understand how effective our digital campaigns are. Once all the alarms have been installed the RadioLINK system is secured by a special House Coding function to safeguard the system from interference from other RF systems.Simply fit an Ei168RC to one of the existing Alarms and fit the additional Alarms with Ei168RC bases and house-code the RadioLINK Alarms into a system. Note that there are restrictions on some products, and some products cannot be shipped to international destinations. The Ei168 itself is also mains powered and has rechargeable lithium cells for back-up in the event of mains failure. The Ei3024 Multi Sensor Fire Alarm is built on the same high quality, reliable and proven technology that all Aico Alarms are renowned for, but contains the latest high-tech enhancements, making it.

The Ei168RC is an Easi-fit mounting plate with built-in RadioLINK circuit compatible with the Ei140RC serie. To set a hybrid system up – Simply fit one Ei168RC base to an alarm in the existing alarms and any new alarms with Ei168RC bases. This Easi-Fit base allows Aico alarm systems to enhance early detection and warning of fire by sounding all the alarms in your property if any of the interconnected alarms are triggered. The information does not usually directly identify you, but it can give you a more personalised and consistent web experience. They mention that it works a dream, is very good when extending existing installation, connects straight away, and is a good product.It therefore eliminates the need to run long interconnect wires between all the smoke alarms on different floors and in different rooms. The house coding feature confines the RF communication to designated RF devices only, thereby avoiding the inadvertent activation of neighbouring Alarm RF systems. The Ei168 RadioLINK Base transmits a Radio Frequency (RF) alarm signal when the unit attached to it senses fire.