Cooler Master MasterBox NR200 Mini ITX Computer Case - Compact SGCC Steel Chassis, Tool-Free 360 Degree Accessibility - NR200 Black

Product Information

Degree Accessibility: Every panel and frame part can be dismantled to allow advanced disassembly and 360 degrees of access to work on components. Another fun design consideration of the NR200 is that the side panels are swappable, so you really don't have to worry about which side they came off of, just slap them back on when done. PCPartPicker may receive compensation for purchases made at participating retailers linked on this site.

In aid of this effort, we have seen Sony reaffirm its commitment to subscriptions through its revamped PlayStation Plus Extra and Premium tiers. The NR200P comes with the choice of a vented steel side panel for unrestricted airflow, or a crystal-clear tempered glass side panel to reveal the beauty of a computing beast. They would rather have a good build experience, plenty of room to work with and the option to build how they want instead of conforming to what the designer intended. Front I/O is plain and simple just the way I like it, especially on a form factor that is often missing the header for a Type C connection anyway. Thermalright Phantom Spirit 120SE for 40 Euro, Thermalright Frost Spirit 140V3 for 35 Euro, Noctua C14S for 65 Euro, or Noctua U12A for 80 Euro?Open ventilation and multiple fan mounts bring airflow where it’s needed, while generous watercooling and aircooling clearances allow the fitment of coolers that can take advantage of all the airflow. TOOL-FREE PANEL REMOVAL, 360 DEGREE ACCESSIBILITY - Each external panel (and the top mounted fan) is secured with quick access pins (tool-free), while the frame itself can be fully dismantled for advanced setups requiring access from all angles.

Once the top is removed you have full access to build from just about any angle so you're not going to find yourself frustrated like in other cases where you have trouble reaching that pesky 8-pin EPS connection. The components used in this build were originally used in a Node 202 build which is why we stuck with the low profile cooler. The process of building a computer has come a long way from its humble beginning and we can thank the computer enthusiast for helping to actually make the hardware better. If you thought that the only fan was the preinstalled 90mm rear fan like I did you'll be pleased to find an extra 120mm CM Sickleflow fan in the accessory box with push pins and fan grill already attached!This case supports really long graphics cards, CPUs up to 155mm at 280mm radiator on the side or a 240mm at the bottom. Originally wanted to mount the AIO on the top panel, but because of clearances it ended up at the side.

Now a few things to keep in mind, if you are in the SFX-L position for the power supply, it will block the top front fan from having clearance, because it does interfere with that power cable. The rear ventilation contains PCI slots to allow for vertical GPU mounting to better showcase the graphics card (PCI riser cable sold separately). The NR200 is not exactly compact for an ITX space, it comes in at 18 liters, which is bigger than my Corsair ONE. for thermal control in the node 202) with the Cooler Master G200P on an Aorus B450 ITX board with 16GB of G. Performance wise the NR200 with the included 120mm fan at the top is absolutely enough, and you don’t need additional fans in there since so out of the box cooling is phenomenal.Cooler Master Mini ITX Case NR200 can house up to 7 fans in total for every cooling configuration imaginable. There is no fan hub which means you will probably be using fan splitters which have to go behind the GPU in the basement because PWM fan splitters are too thick to fit in the right side panel. The inclusion of water cooling and air cooling provisions ensures that coolers can accept all the airflow necessary to run at peak performance.

You can mount a 155mm tall CPU cooler (153mm if using the tempered glass panel) and a 3-slot graphics card as long as 330mm with a maximum width of 156mm. The only limitation here is that you cannot install the side fan radiator bracket if your CPU tower clearance is higher than 155mm. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. I’ve inquired further about the reasons for the retirement, but for now, it appears that the NR200’s about to become a collector’s item.We also share information about your use of our site with our social media, advertising and analytics partners who may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services. High-quality Materials: Thick, powder coated SGCC steel lasts the life time of the chassis and resists marring from transport or handling.