T-Cut Grey Scratch Remover Color Fast Paintwork Restorer Car Polish - 500ml plus a Wax Applicator Set with Handle * 13 Colours Available

Product Information

Yes, T-Cut can help remove excess lacquer. Lacquer overspray can easily be removed with the Original T-Cut cutting compound. Can it remove spray paint? Once the scratch has gone, you need to take another clean cloth and remove the excess product. Again, this can be done with circular motions, and will ensure a buffed up finish. Not to mention, through buffing any excess tcut away, you remove any potential damage from unnecessary drips. Next comes the application. Working in a circular motion, rub the solution over the scratched area, applying firmly to ensure it gets into the grooves of the damage (especially with coloured T Cut). In many cases, the cloth changes colour as the top layer of paint is removed. Don’t worry, that is perfectly normal although it is not the case with metallic finishes as the lacquer on these is clear. Not all surfaces are made equal. T-Cut Solution works best on metal surfaces and paintwork with a glossy finish. Using it on matte paint finishes or non-metallic paintwork can cause more harm than good. Time is of the Essence There are, without a doubt, a few places where tcut can be a useful tool for car owners. Where T Cut can be used on all types of car paintwork, no matter the type or colour of the car, it is more versatile than just being restricted to automotive vehicles. T Cut, as a compound, can also be used on caravans, boats and even around the home to help remove scratches. Furthermore, as well as a car scratch remover, T-Cut is used by some as a cleaning process to help restore vehicle paint. Similar to when you polish car scratches with a coloured car polish, T-Cut helps remove minor imperfections from the surface of your car.

T-Cut Colour Fast is perfect for restoring the original colour of your car, while T-Cut Rapid Scratch Remover is a favourite for handling light scratches. If you’re dealing with metallic paintwork, then T-Cut Metallic Colour Restorer is your go-to. For those with stainless steel, Tetrosyl Cutting Oil will be your best friend. Instructions for Using T-Cut on Your Car’s Paint The frequency of using T-Cut depends on the condition of your car’s paintwork. Generally, for maintaining brilliant shine and dealing with minor scratches, T-Cut can be used every 3–6 months. The T-Cut Original range is a stalwart in the car care industry, renowned for its scratch removal formulas. Originally conceived to reinstate the original colour and shine of vehicle paintwork, T-Cut products have earned a loyal following among car owners worldwide. Today, the T-Cut range includes for diverse metal surfaces:When using T-Cut, safety should be your priority. Always ensure you’re in a well-ventilated area and wear gloves to protect your skin. Common Mistakes to Avoid Essentially, T-Cut is a good short-term solution, as it will primarily provide your car with a shine. Whilst also removing any light scratches or marks. But this is temporary, as the paint will eventually fade, so a longer-term solution would be a new paint job. For a car with dull and fading paintwork. When Is T-Cut Not Suitable For Use? T-Cut Color Fast is a revolutionary coloured paintwork renovator with Variomorphic Ceramic Technology that removes light scratches*, oxidation, ingrained dirt, bugs and surface imperfections. The coloured pigments and the SiO2 molecules enriches colour, cleans, restores and polishes in one easy application, leaving a protective shine that lasts and lasts. Where tcut is not suitable, however, is with deeper scratches where it is far less successful, or even places where the car has been dented as well as scraped. It should only be used to rectify light, shallow, surface scratches where T-Cut can be most effective. Keyed car scratches or deep scrapes from a wall or kerb can often be too deep, going all the way down to the basecoat or primer layers of the car paint, for a simple cutting compound to fix. Where this is the case, a stronger method of scratch removal may be needed, and we’ll talk more about this later. How Does T-Cut Work?

Yes, by removing cloudiness from clear, plastic headlights, T-Cut can be used to restore headlight clarity, which will then result in the visibility of light to increase. This can also be applied to windows and plastic glass, which will enhance the clearness whilst adding a shine.

T-Cut Colour Fast Dark Grey / Silver 500ml

Have you ever walked past your car and done a double-take because you’ve just noticed a scratch? And then you frantically rub over it, hoping it’s just a dirt smudge, but it remains. T-Cut Colour Fast – Removes minor scratches, scuffs and marks, all whilst adding colour, in one simple application.